DIY Burlap Curtains

Hey Y'all,
Guess what?  I have a tutorial for you - can you believe it?  I know, I know...I'm long overdue. 

Wouldn't you agree that every woman needs to know how to make a curtain, especially with the trend of Chevron fabric and cute burlap out there?!  If you're feeling domestic and in the mood for a change - here's an easy DIY tutorial for you.  Curtains were my first project as a seamstress, and it only gets easier with each one.  You might actually find yourself looking for places to hang a curtain because they're so easy to make and always gives a huge facelift to your windows. 

My window at work provides a great source of natural lighting - but it's really boring and drab.  So, I knew a cute cafe curtain would do the trick. 

BEFORE Pic. 

The Shopping:
- 1-2 yds of burlap fabric, for a "cafe" style curtain.  You will need more if you're doing a floor length.  - Cafe rod: these are inexpensive at places like Target, or Wal-Mart.
- Coordinating thread, I chose white.

- Iron and ironing board: always iron your fabric before you sew - makes life easier.  Even with burlap. 
- Pins: I recommend using the ones with little colored balls at the end of them - this helps locate those little gems if they fall on the ground.
- Wide burlap chevron ribbon (optional)
- Sewing machine:  I highly recommend a Singer "Simple" Model #2263 - it's a great starter machine.



The Process:

Step 1:
Take your burlap and measure to your specifications.  My window measured 38" wide, so I cut to 40" to allow for more "scruntch" at the top of your tab. I measured about 20-22" for the length, although - looking back, I would have cut it a bit shorter, closer to 18". 

Step 2:
Make your top tab (where the rod will go) - I measured 3" for the top fold, pic 1a.  Then, pin this down all the way across, as seen in pic 1b.

1a.

1b.

Step 3:
Sew your seam.  I made the stitch to line up with the left side of my foot, pic 2.  The good thing about burlap is that it's really hard to tell what the "wrong" side is vs. the "right" side.  So, if you mess up - it's easy to cover.  

2

 
Step 4:
Check to make sure your finished seam is what you want.  From experience, sometimes your thread gets caught and knoted.  So, make sure before you go any further that your seam is smooth and has no knots.  Your stitching should look something like this (pic 3) on the RIGHT side of your fabric (what will be facing you).

3

  


Step 5:
Sew your bottom tab - I did a 1" fold.  Typically your bottom tab is much thinner than your top tab.  Pin this down, but do NOT sew yet. 

4

Step 6:
Take your wide ribbon and place the ribbon on top of your fold (pic 5a.).  Then, pin this down (pic 5b.)

5a

5b

Step 7:
Then, take your curtain and flip over to the WRONG side, and sew your ribbon to the bottom tab.  Your ribbon should be touching the base of your machine.  In other words, if you're sewing and your ribbon is on top, you need to flip it over to the other side.  Reference pic 6 below.

6

Then, flip over back to the right side and you are finished - enjoy the new addition to your office space, or home...

AFTER

Now, it's your turn!  Any other projects you're working on that you want to share with me?!  I'm always up for a new idea. 

Southern Love,
Emily

From Old to New: A Throw Pillow

For months now, I've had my eye on the dreaded, boring, wide-striped, brown and green throw pillow in my guest bedroom.  A few years ago, it was a total steal at Target.  I loved it.  However, since my sewing ventures, I've wanted to really tackle it and convert it into something new and fresh for my bedroom (now in greys, blues and black).  This Saturday was another Sewing Circle day and a perfect opportunity to take on the challenge. 

The girls and I sat around as I pulled the pillow out among the sea of fabrics - you should have "seen" the wheels turning!  To re-cover it seemed like the easiest choice, but no one knew how to sew in a zipper and to make an outside stitch wasn't appealing to me or anyone else.  Then, it was like the silent wheels in our heads stopped and one spoke up and asked, "What about ties?"  Perfect.  That'll do it.  Our beloved teacher was unable to attend last minute, so it was up to us to help each other in completing each project: a few square pillows, 1 tie throw pillow (my project), a duvet cover, and the most grueling?  Recovering a couch.  Yes.  You read that correctly.  One of us decided to take the plunge and wanted to re-cover an old couch.  Let's just say I'm glad I'm not giving you a tutorial post on how to make covers for your cushions.  (Now, just in case your wheels are turning concerning my friend's supply list, she did not lug the couch to Sewing Circle - she only brought two cushions for measuring.  Rest assure, we're ambitious ones, but still very much girls in the truest sense when it comes to carrying our supplies to class).

For my project, all you really need is a throw pillow, some fabric (about 1/2 - 1 yard, depending on the size of your pillow, of course) and some thread.  Easy, peasy!

How To:

1. Cut your fabric to cover your pillow - make sure you leave enough on the sides to make holes for your ties.  Then make a nice fold with the side you want showing together:

2.  Sew your seams.  They should look something like this: 

3.  Next, measure (mine were about 24" each in length) and sew your ties. This was a little bit more time consuming than I had anticipated.  But, totally worth it.  You may choose to leave them with a frayed look and that is totally acceptable.  It all depends on the "look" you're wanting with your pillow.  I desired a more polished throw, while others may want a more rugged, unfinished look - which I think could look just as great (and certainly way less time consuming)!

4.  Now, you're ready to stuff your pillow in your new lining to prep for the tie holes.  I took my trusty tape measure to see exactly where I wanted the holes.  I decided on two on each side for now, especially after sewing those pesky ties.

 

Then, I took my pins and used those as markers for where I wanted them. 

5.  I'm not proud of this moment - but I decided to make a small cut for each of the 4 holes.  I haven't conquered the world of button holes on my machine, but I will and I'm sure I'll fall in love with it.  But, until that day arrives, I settled for a simple, very unprofessional "half-moon-fold-material-together" kind of cut.  And, I think it worked out just fine.  Besides, no one can really see the unpolished holes because the ties are that adorable, don't you think?

6.  The last step is to put your ties through your holes and simply tie a knot or a bow - the choice is yours, my friend!  Clearly, my very outdated iPhone takes poorer pictures than my digital camera.  Lesson learned.